THE CONNECTED CO2 SENSOR, WHAT IS ITS PURPOSE?
The CO2 sensor has been at the center of discussions in recent weeks for public buildings, more precisely in schools and universities, to better prepare for welcoming students. How can we prevent the spread of viruses? How can you protect your employees and students? The CO2 sensor measures the level of CO2 present in the air and also alerts when the CO2 concentration threshold reaches 800 PPM.
The High Council of Public Health recommends implementing measurement campaigns in public buildings to identify potential risk areas. Ventilation and airing of enclosed spaces are among the most recommended measures in the health protocol for public buildings. Remember that CO2 is produced through our breathing. A too high presence of CO2 in a room is harmful to health. The higher the CO2 concentration threshold, the higher the risk of contracting viruses including Covid-19. The CO2 sensor is therefore a good way to check air quality when your students are present in an enclosed space.
It is strongly recommended to air out rooms for 15 minutes before students enter the classroom. Airing rooms is also recommended when the room is empty to renew the air (during recess, between classes, at lunchtime, etc.). But airing should also be done when your CO2 sensor indicates that the CO2 concentration threshold in your room has been exceeded, even if the space is occupied.
Today, the indoor air quality market is booming, so we have access to all types of CO2 sensors (connected or not). We will look at the differences between a connected sensor and a non-connected sensor to help you choose your CO2 sensor equipment.
THE CO2 SENSOR, THE TOOL TO MEASURE INDOOR AIR QUALITY
Let's start from the beginning: a CO2 sensor is a measuring device that mainly allows you to measure:
- The level of CO2 present in the air. This should not exceed a certain threshold, 800 PPM. When your CO2 sensor measures that this threshold is reached, an alert is issued via a message alert on your phone, tablet, or computer. It is also possible to be alerted directly via your sensor, which will emit a light that activates if the CO2 concentration level is too high.
Note: a non-connected CO2 sensor will only provide information on its own display, showing the CO2 concentration level directly on its screen or by flashing.
- The humidity level in a room. Your CO2 sensor or measuring device allows you to see the humidity level in your room. A correct humidity level in the air is between 45% and 65%; beyond this range, it can present risks. Your CO2 sensor thus helps prevent certain risks such as respiratory problems, migraines, fevers, nausea... which are linked to too high humidity levels.
- The temperature of your room. It is important to maintain the temperature of an enclosed space. Excessive temperature could cause drowsiness, headaches, dry your mucous membranes, which can promote virus contraction.
These different air components often cause various ailments such as headaches and promote virus transmission among other issues. Beyond helping you know when to air your rooms, it is always more beneficial to pair your CO2 sensor with an air purifier to minimize the risk of virus transmission and improve your indoor air by purifying it.
THE CONNECTED CO2 SENSOR, A PRACTICAL MEASURING TOOL FOR YOUR DAILY LIFE
Have you ever wondered what your daily life would be like if you could have an overview of the data collected over the past weeks or months in just a few minutes?
This is what the solution with the TiCO2 sensor offers. The TiCO2 sensor, also called the measuring sensor, measures the CO2 level as well as the temperature and humidity present in the air of an enclosed space. This connected sensor uses a low-power Sigfox network and has an autonomy of several years without any wiring needed in the room.
It can therefore be installed and deployed easily and at low cost to manage the way you air your spaces in the simplest way possible.
Whether you are inside the building or not, you will have access to this data compiled in an interactive table. Interested in just one room? The TICATAG Connect platform can reveal all the data the sensor has captured during the day, over the past weeks, or even previous months.
Whether you are in the concerned room or the manager of a facility, the CO2 sensor gives you a concrete overview of the ambient air in your enclosed rooms.
But can we say that using a connected CO2 sensor could make your daily life easier?
We answer with a big YES.
Save time by viewing data from one or several rooms at a glance thanks to your sensor connected to the platform
If you want to equip your facility, get a quote, or have more information about our solution
